Skip to content
FloraVista

Choosing plants · AI and tools · Calculators

How FloraVista chooses plants

The fixed rules FloraVista uses to pick the plants in your garden plan: filters, roles by bed size, quantities, substitutes and checks, and what it doesn't do.

Updated · first published · 6 min read

FloraVista helps you design one bed at a time. You send a photo of the spot and answer five questions: ZIP code, bed size, hours of direct sun, whether pets or deer use the yard, and a style. You get a picture of the redesigned bed and a garden plan. The plants in that plan are picked by fixed rules, not by an AI. The rules narrow a plant table down to the plants that suit those conditions and fill set roles for your bed size. They work out quantities from each plant's spacing and add two substitutes for each plant. Then the whole selection gets checked before you see it. Below is each step, what the system doesn't do, and where the plant data stands right now.

What you give us

AnswerWhat it is used for
ZIP codeYour USDA hardiness zone and your state (for heat regions and invasive lists)
Bed length and widthThe bed area, which sets how many kinds of plant and how many of each; the shorter side limits how wide a shrub can be
Hours of direct summer sunOne of four bands: 6 or more, 4 to 6, 2 to 4, under 2
Pets and deerWhether to exclude plants toxic to dogs or cats, and whether to require high deer resistance
StyleModern, cottage, natural, low-water or classic, or "surprise me"

The photo is only used to draw the redesign picture. It has no effect on which plants get chosen.

Step 1: filter

A plant stays in the running only if all of these are true:

  • Your zone is within its hardiness range.
  • Your region isn't one where the plant is known to struggle with summer heat. (Your zone only measures winter cold. See hardiness zone vs heat.)
  • It's rated for your sun band.
  • If you said dogs or cats use the yard, it isn't recorded as toxic to dogs or cats.
  • If you said deer visit, it's rated highly deer-resistant. If that leaves too few plants, moderately resistant ones are allowed, and the plan tells you.
  • It isn't on the invasive list for your state.
  • It's tagged as suiting the style you picked.
  • It hasn't been pulled after a customer report.

Step 2: roles by bed size

A good bed has a mix of plant types, so the rules fill fixed roles. How many depends on the bed's area:

Bed areaAnchorStructureFillerGrassEdge
Under 40 sq ft01211
40 to 120 sq ft1 if 80 sq ft or more, else 013 if 80 sq ft or more, else 211
Over 120 sq ft12311

What the roles mean: the anchor is the biggest plant and the focal point. Structure plants are the shrubs or large perennials that hold the bed's shape. Fillers carry most of the flowers. The grass adds texture and movement, and the edge plant finishes off the front.

Two more rules apply on top of that:

  • It has to fit. An anchor or structure plant can't be wider at maturity than the bed's shorter side. You won't get a 5 ft wide shrub for a 4 ft deep bed.
  • Minimum variety. A list needs at least five kinds of plant for beds of 40 sq ft or more, and four for smaller beds. If no plant qualifies for a role, that role is skipped. If that leaves too few kinds, you don't get a plan (more on that below).

Step 3: pick within each role

When more than one plant qualifies for a role, the rules prefer, in this order:

  1. Plants that are commonly sold over ones sold sometimes, and both over specialist plants, so you can actually buy them.
  2. Bloom spread across spring, summer and fall, plus winter interest from evergreens.
  3. No flower color used more than twice.

Any tie left after that is broken by a seed number, so the same answers and seed always give the same plants. "Try another style" uses a new seed.

If the style you picked doesn't have enough eligible plants, the rules switch to the style that has the most and tell you. "Surprise me" uses that same rule.

Step 4: quantities

Every plant has a spacing, based on its mature width. Its footprint is treated as a circle: 3.1416 × (spacing ÷ 2)². The rules share the bed out between roles and set quantities so all the plants together cover between 70% and 95% of the bed. Under 70%, the bed looks sparse for years. Over 95%, plants crowd each other. If the total runs high, the biggest group of fillers gets trimmed first. If it runs low, fillers or edge plants get added.

Here's an example. In a 72 sq ft bed, four plants at 3 ft spacing, six at 2 ft and twelve at 1 ft have a combined footprint of about 56.5 sq ft. That's 78.5% of the bed. The math is laid out in how many plants do I need for a garden bed.

Mulch is worked out on its own: bed area × 3 inches ÷ 324 gives cubic yards, and the plan also tells you how many 2 cu ft bags that is (rounded up). See how much mulch do I need.

Step 5: substitutes

Each plant's two substitutes are the next two best plants for the same role that pass all the same filters. So if your nursery is out of the first pick, the substitutes have already been checked for your zone, sun, pets, deer and state.

Step 6: checks

Before any plan is shown, its plants are checked again. Every plant has to be in the table, and every filter still has to hold for every plant. The quantities have to add up, the footprint has to land inside 70–95%, and no plant can show up twice. If the plants fail any check, the plan isn't shown.

When there aren't enough plants

Sometimes fewer kinds of plant pass the rules than the minimum, for example deep shade in a very cold zone. When that happens, we tell you straight out and don't charge you. You can leave your email to hear when we've added more plants for those conditions. We keep track of these gaps to decide which plants to add next.

Where AI is used, and where it isn't

  • Choosing plants: no AI. The steps above are ordinary code working on a table.
  • The picture: an AI image model redraws your photo with the new planting and keeps the house, paths and existing trees. It shows the style and layout. It isn't an exact drawing of each plant.
  • The "why this plant here" sentence: written after the plants are final, from facts stored with each plant. An AI language model may write it, and there's a plain template version that works without one. Either way, it can't change which plants are in the plan.

What it does not do

  • It helps with one bed at a time. It doesn't do whole yards.
  • It can't see or test your soil. Drainage and soil type matter, and your extension service can test soil for not much money.
  • It doesn't design hardscape, lighting or irrigation.
  • It doesn't know whether your local nursery has a plant in stock. That's why it leans toward commonly sold plants and gives you substitutes.
  • It doesn't know where your utility lines are. Call 811 (call811.com) before you dig.

Review status

A horticulturist hasn't reviewed the plant table yet. Until one has, every plan and plant page shows: "Preview: plant data is awaiting horticulturist review." Please check the plants using the steps in how to check a plant list. If you spot a problem, use the "Something wrong with a plant?" button. Reported plants can be pulled from new plans.

Price

The redesign picture is free. The full garden plan is $19.

To see what the rules pick for your own yard, get a plan for your yard.

Questions and answers

Does AI choose the plants in a FloraVista garden plan?
No. Fixed rules pick the plants from a plant table. AI draws the redesign picture, and it may help word the short reason shown for each plant, after the plants are already set.
Has the plant data been reviewed by a horticulturist?
Not yet. The plant table is waiting on review by a horticulturist, and every plan and plant page says so until that's done.
Will I get the same plants if I enter the same answers twice?
Yes. The same answers and the same starting seed always give you the same plants. Trying another style uses a new seed, so you can see other options.
What happens if not enough plants fit my conditions?
We tell you, and you aren't charged. You can leave your email to hear when we've added more plants for those conditions.

Work it out for your own bed

Free tools

Plant lists by condition